Hem |   Kontakta oss   |   Om Ekab   |   Villkor   |   Support   |   Nytt login   |   ÅF ansökan   |   English
Kategorier:SMARTA HEM » Belysning z-wave
SMARTA HEM » Hem/Fritid » Hemautomation


[ HU-236661 ]
With the FIBARO Single Switch 2, you can integrate existing electrical installations (e.g. lighting, airing systems…) into a Z-Wave network. Thus, the connected devices can still be controlled with the existing wall switch, but – thanks to Z-Wave – also via remote control, smartphone or sensor-controlled automation.

The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the loads but acts as input device for the FIBARO insert that is controlling the loads. The switch only sends control signal to the insert which controls the loads then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
Fibaro Dimmer 2 and Dimmer Bypass 2 can only be used together with light sources which are clearly marked as ‘dimmable’.


Radio module for wall box installation
2 independent relays
Scene activation
Energy metering function
Max. load: 6,5 A / 1,500 W each channel, 10 A in total, 100 ~ 240 V AC, 50/60 Hz
Operating temperature: 0 ~ 35°C
Wireless Technology: Z-Wave Plus
Dimensions: 38x42x20 mm
Power supply: Mains powered

Garanti1 års Garanti



Nya produkter


Ekab | Molijns väg 8, 589 41 Linköping | Tfn. +46 13 369300 | Fax. +46 13 369320

Total time : 6 ms